BCQXY - BZN TOOL BLANKS & INSERTS
- MSDS: BCQXY
- Manufacturer: GENERAL ELECTRIC CO SPECIALTY MATERIALS DEPT
- Product Name: BZN TOOL BLANKS & INSERTS
- National Stock Number: 3455-00N008749
Product Identification
Product ID:BZN TOOL BLANKS & INSERTS
MSDS Date:11/12/1985
FSC:3455
NIIN:00N008749
MSDS Number: BCQXY
Responsible Party
WORTHINGTON, OH 43085
Emergency Phone: 614-438-2205
Cage: 08036
Contractor
Telephone: 614-438-2205
Cage: 08036
Ingredients
COBALT (SARA III)
CAS: 7440-48-4
RTECS: GF8750000
OSHA PEL 0.1 MG/M3;AS CO
ACGIH TLV: 0.05 MG/M3;DUST 9293
TUNGSTEN CARBIDE
CAS: 12070-12-1
RTECS: YO7250000
OSHA PEL 5 MG/M3/10 STEL (W)
ACGIH TLV: 5 MG/M3/10 STEL (W)
CUBIC BORON NITRIDE
CAS: 10043-11-5
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: POTENTIAL FOR CAUSING TRANSIENT
OR PERMANENT RESPIRATORY DISEASE (PROBABLY FROM COBALT DUST).
INGEST: NO INFO AVAILABLE FOR INGEST THAT MAY HAVE OCCURRED IN THE
TUNGSTEN CARBIDE INDUSTRY. IT HA S BEEN SUGGESTED THAT COBALT HAS
POTENTIAL FOR CAUSING BLOOD, HEART, AND ORGAN PROBLEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHAL: DUST FROM GRINDING CAN CAUSE THROAT &
NOSE IRRITATION. SKIN: CAN CAUSE IRRITATION OR ALLERGIC SKIN RASH
DUE TO COBALT SENSITIZATION. EYES: CAN CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. SEEK MEDICAL ATTENT.
INGEST: IF SUBSTANTIAL QUANTITIES ARE INGESTED,DILUTE WITH A LARGE
AMOUNT OF WATER, INDUCE VOMITING. SEEK MEDICAL ATTENTION. EYES:
FLUSH EYES WIT H WATER FOR AT LEAST 15 MIN. SEEK MEDICAL ATTENTION.
SKIN:WASH WITH SOAP & H*2O,SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:N/A
Extinguishing Media:N/A
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SWEEP UP AND DISPOSE INERT SOLID.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:HANDLE WITH ADEQUATE VENTILATION FOR
NUISANCE DUST.
Other Precautions:ADEQUATE EXHAUST.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL MECHANICAL NECESSARY TO KEEP AIR CONC
BELOW TLV .
Protective Gloves:WHEN CONTACT WITH DUST OR MIST IS LIKELY
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS(SUPP DATA)
Other Protective Equipment:N/K .
Work Hygienic Practices:N/K
Supplemental Safety and Health
EYE PROT: WEAR SAFETY GLASSES W/SIDE SHIELDS WHEN OPERATING
GRINDING,CUTTING OR DRILLING EQUIPMENT.
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:N/K
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
N/K
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:N/A
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.